Diy Blackjack Table Cover
A typical casino poker table has a length of between 92 and 104 inches (234 and 264 cm), a width of 44 inches (112 cm), and a height of 30 inches (76 cm). You can expect to also add 4 inches (10 cm) to the length and width for the outer “racetrack” railing. The weight commonly ranges from 170 to 200 pounds (77 to 91 kilos ) but can go up to as high as 350 pounds (159 kilos).
Outside of casino models, there is no official or standard sizing for poker tables as it all depends on who is making it and the shape of the table. In fact, there is pretty much a table out there to fit any space. From roll-up poker mats to octagon, round, and oval folding poker tables, with and without legs. And, of course, you have the high-end professional versions that are meant to simulate casino quality tables. Let’s take a look at the various types and shapes found in home poker tables, what they are made of, and how many people they typically seat.
Cut your carpet padding to cover the top of your table. Don't worry about the cupholder holes. Paint adhesive over the entire table top and over the entire bottom of the carpet padding. Carefully lay the padding onto the table. Hit, stand, or double down? The Blackjack Table Cover transforms an ordinary tabletop into a center of gaming activity. Made of green felt and screen printed to look like a real blackjack table, the table cover comes with a blank reverse side for card games or whatever else your casino night requires.
Please note, dimensions will be listed in the following format in inches: Length x Width x Height (cm conversion)
Oval Poker Tables
Oval poker tables are the most common design and home models usually fold up for storage.
- Sizes
Permanent home versions are often 92x44x30 (234x112x76). Foldable models are usually about 84x42x30 (213x107x76) but can be as small as around 73 inches long and 32 inches wide. - Weight
54 to 85 pounds. - Materials
Tops are usually felt-covered wood, the railing vinyl, and the legs steel. Materials can vary based on the quality and price point. - Number Of Players
Most oval tables are designed to hold 9 or 10 players, however, some of the smaller models typically only hold 6 or 7 comfortably. To truly hold 9 or 10 players, 84-inch width and up is recommended.
Octagon Poker Tables
Blackjack Table Cover
Octagonal tables have grown in popularity since most home poker games consist of 4-6 people. These tables are nice and compact and handle that number of people easily.
- Sizes
48x48x30 (122x122x76) for foldable models. Tabletop versions are usually the same size but occasionally are found a bit bigger, around 50 inches wide. - Weight
45 to 60 pounds with legs, 20-40 pounds for tabletop versions. - Materials
Folding octagonal tables are usually felt-covered wood, the railing plastic and occasionally vinyl, with the steel legs. Tabletop versions are often felt-covered plastic, with a plastic border or “railing”. Again, materials can vary based on the quality and price point. - Number Of Players
Most octagon-shaped table, like this one found on Amazon , are designed to hold up to 8 players. However, most versions will comfortably hold 5 or 6.
Round Poker Tables
Round poker tables are actually the least common design you will see and are typically only available in permanent options.
- Sizes
48 to 60 inches wide. Tabletop versions are hard to find but are about 48 inches wide. - Weight
Too rare to put a common weight. - Materials
Varies. - Number Of Players
There’s a reason round tables are out of vogue; they just don’t hold as many people as oval or octagonal models do. Most round poker tables hold 4 people, 5 if you squeeze in.
Square Poker Tables
Square tables are also rare and about 34 inches across. Since they only hold 4 people, most people opt for a different shape, or just use a square table from Walmart. Even so, if you only hold small games, they can be a decent option.. if you can find one. Tabletop versions that can be set on an existing dining room table do exist, however, my advice is to instead get a rectangular mat… covered in the next section.
What About Poker Mats?
Poker mats are an excellent option for the occasional impromptu card game. They are light and portable as is humanly possible, since they are made of either cloth or rubber, and typically come in a rectangular or oval shape. Poker mats, like this one found on Amazon, are usually about 72×36 (183×91).
Diy Poker Table Cover
Space Needed For A Poker Table
Ideally, you want at least 3 feet (1 meter) of clearance around a poker table to allow for adequate seating and movement around the room. If you have a small square poker room, I would suggest an octagon-shaped table, as these seem to fit best in small spaces while allowing for a maximum number of people to be seated. If your room is rectangular, any oval table like this nice Amazon model, that fits within the parameters of the space will do fine.
Important Tip: When choosing a poker table make sure that you look at the actual total dimensions of the table including any railings. Often, the sale listing of a poker table will only include the dimensions of the actual playing area of the table
What About Chairs?
Diy Blackjack Sap
Remember to always leave ample space and elbow room around your poker table for people to be able to get in and out of their chairs and maneuver their poker chips. I would recommend just getting folding chairs for your poker buddies unless you are playing at a dining room table that already has nice sturdy chairs. On that front, I suggest that you invest in some heavy-duty chairs that will hold players who might be on the heavy side. Here are some that should do the job nicely. They have a really high weight capacity.
Do Covering Types Affect Table Size?
All types of table coverings can be affixed to any table dimension. Even so, while covering types do not directly affect the space that a table will fit, you may want to consider using a faster cloth in more enclosed spaces. With standard cloth, the cards will not move across the surface and someone dealing at the end of the table in a recreational game will have a hard time sliding the cards all the way to the other end on slower cloth. There are two common options for poker table coverings, or felt; standard felt or speed cloth.
- Standard Felt
This is the standard choice for the most poker tables, especially lower-priced versions. The surface has a roughness to it and often it is challenging to get the cards to slide all the way out to where you want them while dealing. However, this is the least expensive surface and is fine for most players. Even so, some people like to upgrade to a “professional” surface, called speed cloth. - Speed Cloth
A lot of poker enthusiasts and professional poker players prefer the surface they play on to be a bit faster than standard felt. Therefore, they often want to play with speed cloth. Made of a more slippery type of polyester, you will have no issues getting cards to slide from one end of the table to the other end while dealing. However, players not used to a faster surface may grumble that the cards are sliding too fast, and sometimes flying off the table. The vast majority of poker tables do not come standard with speed cloth, as it is usually an upgrade only if one is willing to pay for the option.
A Brief History of Poker Table Sizes
The earliest card tables show up in the 1700s in response to the growing popularity of card games around Europe. In fact, it was common for people to buy card tables as fine furniture for their home, prominently displayed. Many versions even had a folding top, which allowed them to function as another piece of furniture when not in use. The wealthier classes paid exorbitant amounts for higher-end tables. Most of the designs were semicircular or oval and typically 36 inches in diameter.
For more about finding the right poker table, I also wrote a comprehensive poker table guide to help you in your search. Thanks for stopping by!
A well-dressed table can add sophistication to any room You can use this softening slipcover for a side table, a dining room table, a front hall table, or anywhere you want to add a bit of style with fabric.
Try this pretty table slipcover in a heavy brocade, denim, or even a cotton canvas. It features inverted pleats that add a touch of elegance; each pleat is centered along each of the table’s lengths. You can add a simple ribbon trim to the bottom edges to match the ribbon you use for the bow detail, but avoid fringe because it’s designed to extend to the floor. This project can be used for any size table.
To determine how many yards of fabric you need, add your table’s height to the tabletop’s circumference, add 12 inches per pleat, and divide by 36.
The table used for this example was 30 inches high, 30 inches long, and 24 inches wide. Adding the width of 30 inches to the length measurement, you get 54 inches. To that you add 12 inches per pleat for a total of 156 inches. Because the table is 30 inches high, 45-inch wide fabric would work perfectly. To find the total yardage needed divide 156 inches by 36 to come up with approximately 4-1/2 yards of 45-inch-wide fabric.
Your ribbon measurements should be in proportion to the size of the table you’re treating.
Follow these steps to make your table cover:
Iron all your fabric well.
Measure your tabletop and add 1 inch to each measurement (for the seam allowance) and record it in your notebook as “Tabletop Pattern, Cut 1.”
Measure the height and width of the front of the table, adding 12 inches to the width for the pleat allowance, plus 1 inch for the seam allowance to both measurements, and record the measurement in your notebook as “Front/Back Pattern, Cut 2.”
Measure the height and depth of the side of the table, adding 12 inches to the width for the pleat allowance, plus 1 inch for the seam allowance to both measurements, and record it in your notebook as “Side Pattern, Cut 2.”
If you’re creating paper patterns, transfer the measurements to paper, cut the paper out, label each pattern piece, and use them to cut your fabric.
If you’re just measuring your fabric, use an L-square to keep your edges straight, and cut your fabric.
Fold, press, and pin your two “Front/Back” pieces to create pleats.
Fold and pin your fabric in 12-inch increments, so that your pleat measures 6 inches (formed by the 3 inches of “tucked” fabric on either side).
Fold, press, and pin your two “Side” pieces to create pleats.
With the right sides together, using a 1/2-inch seam allowance, sew your panels in between the front and back panels.
Sew up to the top, leaving a 1/2-inch area unsewn so that you can sew around the corners when you add the top.
Pin the right side of your top panel to your skirt so that all the corners line up with the skirt seams.
Sew the slipcover top to the rest of your slipcover, matching corner to corner, and with a 1/2-inch seam allowance.
When sewing the unsewn 1/2-inch areas (see Step 8) to the slipcover top, be sure to back tack a few times so your seams will hold.
Hem any unstitched edges with a 1/2-inch seam allowance (or sew on decorative ribbon or other trim to the bottom edge).
Press your slipcover and put in on the table.
Add your bows by locating the top of a pleat and measuring down from the top 7 inches.
Pin two pieces of ribbon of equal length to the inside edge of the pleat. You can either remove the slipcover from the table and stitch the ribbons to the pleat and tie them into a bow, or you can work right on the table and hand stitch them on, whichever is easiest for you.